QSC PLX1804

QSC PLX1840 Power Amplifier hire and rental 

The compact PLX1804 brings the same performance and technology as the rest of the PLX2 Series, plus even greater value, to applications that don't require bridged or 2 ohm operation. Designed to power one or two speakers from each amplifier channel (4 ohm minimum loading), this model offer a simplified feature set while retaining genuine, uncompromised PLX performance and technology. Weighing just 13 pounds (5.9 kg), the "plug-and-play" PLX1804 is perfect for ultra-portable rigs, as well as reference-quality playback.

SPECIFICATIONSPLX1804
Stereo Mode
8 ohms (each channel)
*
  FTC 20 Hz - 20 kHz 0.05% THD
  EIA 1 kHz 0.1% THD


550 W
600 W
Stereo Mode
4 ohms
(each channel) *
  FTC 20 Hz - 20 kHz 0.05% THD
  EIA 1 kHz 0.1% THD


800 W
900 W
Signal to Noise (20 Hz - 20 kHz)-106 dB
Input Sensitivity @ 8 ohms1.20 Vrms
Gain @ 8 ohms35 dB
Output Circuitry2-Tier Class H
Distortion (SMPTE-IM)Less than 0.02%
Typical Distortion
  1/8 rated power, 20 Hz-20 kHz
  Full rated power, 20 Hz-20 kHz

Less than 0.02%
Less than 0.02%
Frequency Response20 Hz-20 kHz, -0.5 dB
Damping FactorGreater than 200
Input Impedance20k ohms balanced
10k ohms unbalanced
Input Clipping5.5 Vrms (+15 dBu)
CoolingVariable-speed fan, rear-to-front air flow
Input Connectors, each channel3-pin XLR and 1/4" TRS balanced
Output Connectors, each channel Neutrik® NL4 Speakon®
(Both channels available on Ch 1 output)
Rear Panel Switches Circuit Breaker
Front Panel ControlsDetented Gain Attenuator: 0 to ∞ dB
Power On/Off
Front Panel IndicatorsClip: Red LED
-10: Green LED
Signal (-35 dB): Green LED
Power: Blue LED
PROTECTION
Amplifier Protection Full short circuit, open circuit, thermal, infrasonic, ultrasonic, and RF protection
Stable into reactive or mismatched loads
Load Protection On/off muting, DC-fault power supply shutdown
Infrasonic-3 dB, 6 Hz
DC fault Power supply shutdown
Ultrasonic-3 dB, 80 kHz
Short Circuit Muting
ThermalLimiting at 85° C, Muting at 90° C
Over Current Active clip limiting
AC circuit breaker
High Line Standard +15%, survive +25%
Low Line -40%
PHYSICAL
Dimensions
  Height
  Width
  Depth, Rack mounting surface to rear panel
  Overall Depth

3.5" (8.9 cm) 2 rack spaces
19" (48.3 cm)
8.95" (22.7 cm)
11" (27.9 cm)
Weight13 lbs. (5.9 kg) net
18 lbs. (8.2 kg) shipping

 
You might also like...