XTA DP324 SiDD
Dynamics Processor

XTA DP324 SiDDĀ 

Ā 

Superb audio quality - carefully optimised double precision signal processing coupled with a 40-bit internal data path ensures a dynamic range in excess of 110dB. The high sampling rate means minimal filtering providing exceptional sonic purity.

A highly accurate 6 band parametric equaliser on each input, providing +15 to -30dB of gain at centre frequencies between 20Hz and 20kHz, with a wide range of 'Q's available between 0.4 to 128. All parameters feature fine resolution with 1/36 octave frequency steps, 0.1dB gain increments, and 100 'Q' settings. Any parametric section can also be set to operate as a high or low shelving filter.

A fully featured compressor with two bands of sidechain equalisation, and featuring variable knee and 'look-ahead' delay for absolute control.

A noise gate / expander, again with dedicated sidechain processing - high and low pass filters plus two parametrics. The 'look ahead' design allows the gate to open before the signal arrives, completely eliminating clicks.

A dynamic equaliser - compress or expand only the frequency band youchoose, with unprecedented control and precision.

A delay line with separate 'A.D.T' module that may be routed to the auxiliary outputs. This allows for 'staging' of performers 'front/back' and 'left/right' of the soundstage.

A 'brickwall' limiter with sidechain EQ and 'look ahead' ability for pre-emptive adaptation to signal peaks, and so complete prevention of overshoot.

A harmonics generator to introduce controlled levels of second and third harmonic distortion, for simulation of 'valve' sound characteristics.

Three velocity-sensitive encoders provide a familiar and intuitive controlformat with all filter information displayed simultaneously on a 2 x 24character backlit LCD screen.

The comprehensive standard specification also includes 256 memories, PC card storage and remote control via MIDI, RS232 or RS485 ports, with security lock-out.

AES/EBU digital input and output interfaces are available as an option.

Input and output balancing transformers are also available as an option.

Inputs 2 electronically balanced [++]
Impedance: > 10k ohms.
CMRR 65dB 50Hz - 10kHz.
Outputs 4 electronically balanced [++]
Source Imp < 60ohms
Min. Load 600ohm
Max. Level +20dBm into 600 ohm
Frequency Resp. +ĖdB 20Hz-20kHz
Dynamic Range >110dB 20Hz-20k unwtd
Distortion < .02%@1kHz,+18dBm

Maximum Delay 300 mS
Min Step Size 2mS
Input Gain +15dB in 0.1dB steps
Output Gain -60dB - +15dB in 0.1dB steps, and 'Off'

Parametric Equalisation
6 per Channel
Filter Gain +15dB to -30dB in 0.1dB steps.
Frequency Range 20Hz - 20kHz, 1/36 octave steps. (368positions) Filter Q / BW 0.4 to 128 / 2.5 to 0.008
(Sections switched to shelving response)

Low frequency 20Hz - 1kHz
High frequency 1kHz - 20kHz
Shelf gains 15dB in 0.1dB steps.

High and Lowpass Filters, 1 of each per output.
Freq. Range HPF 10Hz - 16kHz 1 / 36 Oct.steps.
Freq. Range LPF 35Hz - 22kHz 1 / 36 Octave.steps.
Responses Bessel/Butterworth 12db/Octave

Dynamics Processing
Dynamic EQ module x 2
Gate/Expander x 2
Compressor x 2
Limiter x 2

Additional Processing
Harmonics Generator
A.D.T.Module

Display 2x24 character backlit LCD
Input meter 2 x 7 point, -18dB to +18dB.
Output meter 2 x 7 point, -18dB to +18dB.
Gain reduction & Threshold metering for each module.

Connectors
Inputs 3 pin female XLR; Outputs 3 pin male XLR.
MIDI In 5 pin DIN;External 9 pin DEE connector (RS232)
RS485 3 pin male XLR (out) 3 pin male XLR (in)
Power 3 pin IEC

Power 60 to 250V 15% @ 50/60Hz.
Consumption < 20 watts.
Weight 3.5kg. Net (4.8kg. Shipping)
Size 1.75"(1U) x 19" x 11.8" (44 x 482 x 300mm)
excluding connectors.
Options [++] =Transformers available.
Optional Interfaces AES/EBU Digital Input/Output

 
You might also like...